Train like you fight.
Radio, fire and debrief software for aerial wildfire training, built by Air Attack Officers. Lorby Comms puts real radios at every seat; Lorby Wildfire Response runs the fire.
Communication is the key to a successful mission.
With several aircraft in a concentrated wildfire airspace, the radio is how the operation stays safe. Lorby Comms gives every seat the radios of the real aircraft, over IP, and records the whole incident for the debrief. It runs on its own, with or without the rest of the platform.
Video: a tour of the real Lorby Comms software. The Server on the instructor station and the seats connected to it; the Client panels at each seat; recording and Mark position on the Server; and the Player jumping to a marker.
Server
Runs once, on the instructor station. It sets the channel names and frequencies, plays background radio traffic, and records every channel.
Client
Runs at every seat, a role player, a simulator or a tablet, and joins the Server. Each seat shows only the panels it needs.
Player
Opens the recording for the debrief. Double-click a marker to jump to it; listen to one frequency or to all of them.



Your own channel identifiers
Name the VHF and satellite phone channels and frequencies once, on the Server. Every seat that joins gets the same setup, so you can teach your own system, or learn another agency's.
Lorby Jukebox
The Server plays recorded radio traffic across the network. Turn the rate up and the incident sounds as busy as a real one.
Record the whole incident
Every channel is recorded on the Server. Mark position flags a moment during the mission, such as the start of a checklist, to come back to.
The small details
TX and RX icons show which radio is transmitting and which one you are hearing. Small details like these are what radio management is made of.
Start simple
Overwhelming a student rarely teaches the student much. Set the comms up as simple or as complex as the lesson needs, and show only the panels a seat uses.
Procedures, not only buttons
For most pilots the hardware is second nature. Lorby Comms is where they practise wildfire communication procedures with the people they will fly with.
Run it on a tablet
The whole system runs on a Windows PC or tablet, so a seat can be a desk, a cockpit or a lap.
Use real hardware
A mouse is not a radio. Lorby Comms talks to Arduino microcontrollers, and we build the audio panel and radio heads found in most airtankers and birddogs.
Outside wildland fire
Any team that trains on radios can use it: dispatch, ground crews, other emergency services.
“Less is more.”
If you have been around the business for any length of time you have heard a pilot say it. Painting a detailed picture with as few words as possible, and using the equipment efficiently, takes practice. That practice is what Lorby Comms is for.
Lorby Wildfire Response runs the fire. Every seat fights it.
A networked, multi-user application that works in real time with Lockheed Martin Prepar3D. Create fires and shape their size, intensity and growth, control the weather, add scenery, watch from any viewpoint, and record it all. Three modules build, fly and debrief the mission; Lorby Comms and Lorby FLIR add the radio and the sensor.
- In service
- Alberta Wildfire, Hinton Training Centre
- Engine
- Lockheed Martin Prepar3D, realistic terrain worldwide
- Join from
- The sim room, or anywhere with an internet connection
- Scenarios
- Build a library, save it, fly it again with a different outcome
Take full control of the scenario.
Control every part of the incident and watch it unfold from any vantage point. Google Earth imagery becomes the 2D sandbox, and Prepar3D's terrain matches it closely. Save a scenario and run it again, with a different outcome each time.



Control the fire
Create fires and set their size, intensity and growth. Add spot fires outside the retardant line, or divert to a new incident mid-scenario.
Control the weather
Aircraft carry the real weight of their load, so heat matters: a full load in the morning is hard work in the afternoon. Drop visibility to a couple of miles and the job changes.
Connect with everyone
Anyone with a computer that runs Prepar3D and the Pilot module can join the Instructor Station server.
Hazards, not only fire
Place tall snags on the fireline, communication towers on a ridge, or animated heavy equipment pushing guard down a flank.
Observe everything
Set multiple views around the incident, static or following a specific aircraft, and record the session.
A.I. aircraft
A flight path editor puts fixed-wing tankers on one flank and helicopters on the other, with no extra pilots. Smoke bombs and map markers keep it manageable.
Your connection to the fire. It feels right.
LWR Pilot connects each simulator to the Instructor Station and sets the aircraft up for the mission: external loads, retardant or water, drop rates, weight and balance, with custom gauges for drop control, radar and scenario location.



Real-time weight shift
The aircraft reacts when the load releases, the way it does in the real aircraft.
Weather that fights back
Low visibility, turbulence over the fire, and up and down drafts the instructor can place anywhere.
Bomb tank and drop controls
A hardware interface for the tank and drop controls, so crews use their hands, not a mouse.
Extreme fire behaviour
Fire that crowns, spots and runs. Sometimes learning to do nothing is the hardest lesson of them all.
Dynamic lighting
Fire and vehicle lights for night operations, optimised for performance.
Deliver crews and equipment
Helicopters place people and equipment on the ground in real time, and every seat sees them. A drip torch is available too.

Train with the tools you use.
Lorby FLIR simulates the FLIR camera on the aircraft, and like the real one it finds fires that would otherwise be hidden from view. We built the FLIR software and hardware for the Alberta Wildfire birddogs.
Brief, simulate, debrief. Then do it again, better.
The fireline is not the place to test new tactics. LWR Classroom shows the mission live on external views and GPS tracking in Google Maps, then replays the flying and the radio together.

- 01 BRIEF
Set the incident
Load a saved scenario or build one on real terrain, and brief every crew before launch.
- 02 SIMULATE
Fly it together
Aircraft and role players work the same fire on Lorby Comms while the instructor changes conditions.
- 03 DEBRIEF
Learn from mistakes
Replay the flying and the radio traffic, jump to marked moments, and see what worked and what didn't.
Our software, in cockpits that work like the real aircraft.
The newest part of what we do. Muscle memory comes from doing the action, so we design and build the hardware that is not available off the shelf, in our own shop: CNC, 3D printing, welding and fabrication.
Alberta Wildfire TC695
A TC695 cockpit with custom engine gauges, our own Garmin G600 software with FLIR and TCAS integrated, a dual-seat radio and intercom, and two role-player stations designed for long training days.
- Aircraft
- TC695 (Air Attack)
- Avionics
- Custom G600 software, FLIR, TCAS
- Platform
- Lorby Wildfire Response LWR
- Comms
- Dual-seat radio + intercom, Lorby Comms
- Status
- Complete, 2026
Alberta Wildfire
Rebuilt on modern hardware
Audio panel, Arduino interface, USB drop controller
Observation and HLCO training
“We know what it's like to manage aircraft over a fire, make decisions under pressure, and rely on good training when things are moving fast.”
See the platform in action.
Videos and screenshots from Lorby Comms, Lorby Wildfire Response and our simulators. Videos open on YouTube.

Server, Client and Player, narrated.

Channels, guard and tones, as on the real radio.

The simulated FLIR camera finding hidden fire.

A tour of scenario building and live control.

Fire that runs, crowns and spots.

The pilot module and the simulated FLIR.

A recorded multi-aircraft session played back.

Traffic that fills the fire's airspace.

Ground resources working the fire.
Gallery
A small team with operational depth.
Our goal is simple: make simulated aerial wildfire training better, easier and more affordable for every agency. A coordinated aerial attack is a perishable skill. The team brings 30 years of wildland fire experience, including 15 in fixed-wing Air Attack, Helicopter Coordinator and simulator program work, and 30 years of software and project delivery.
Simulators, hardware, training programs and support.
Owns and sells LWR, Lorby Comms and Lorby FLIR.
Develops and supports the Lorby software with our team.
Air Attack simulator; LWR at the Hinton Training Centre.
Hear your own radio plan in Lorby Comms.
Tell us what your crews fly, which radios they use and how they train. We will set up Lorby Comms with your channel plan, and show the Instructor Station, Pilot and Classroom.
- Phone
- (778) 538-3473
- Office
- 266 Montego Road
Kamloops, BC V2H 1N1 - Social
- Facebook · YouTube